• Vented lids with condensation ringst
• Notched plates and lids for easy orientation
• Alphanumerically labelled well
• Individually packaged (paper/plastic blister packaging)

• Conform with USP Class VI and ISO 10993-5 standards
• Non-pyrogenic and non-cytotoxic
• DNase and RNase free
• BSE and TSE free
• Lot numbers appear on case labels, inner packaging, and individual pieces

• Stackable lids with ventilation ribs
• Gripping ring included (except for 35mm and 150mm sizes)
• Resealable, self-standing packaging

• Individually packed in peel-to-open wrap promises sterility
• Each lot is tested for sterility and endotoxin level
• Clear graduations for accurate volume measurement

• Surface-treated and non-pyrogenic & DNase and RNase-free
• Easily stackable for storage and handling
• Sterilized by E-beam
• High clarity polystyrene for distortion-free observation

• Available in both vent caps and plug seal caps
• Vent caps with 0.22um hydrophrobic filters to ensure gas exchange without contamination
• Surface-treated and non-pyrogenic, DNase/RNase-free
• Clear lot number for batch traceability
• Frosted writing and clear graduation
• Sterilized by E-beam

• Leak-proof screw cap design
• Easy-to-read black graduations with accuracy of 2%
• Able to withstand up to 12,500 xg
• Autoclavableat 121°C and freezable to -80°C
• Manufactured in ISO 5 Clean Room Environment

• Individually packed in peel-to-open wrap promises sterility
• Each pipette lot is tested for sterility, accuracy and endotoxin level
• Factory calibrated ISO 8655
• Non-pyrogenic, DNase- and RNase-free

• DNase/RNase and pyrogen free
• Autoclavable and able to withstand temperatures to -86^oC
• Able to reach up to 26,000 xg
• Non-sterile
• Natural Color

• Manufactured from non-cytotoxic virgin polystyrene
• Good optical clarity for easy colony identification
• Rigidity to resist excessive deformation during agar preparation
• Consistent dimensions with smooth edges
• Sterilized by gamma irradiation
• Stackable & anti-slip
• Triple vent provides adequate gas exchange

• Small footprint and quiet operation
• Palm-shaped lid, suitable for left or right handed users. Allows quick extraction of tubes
• SnapspinTM rotors are tool-free for a fast and easy exchange
• Weighted rubberized base eliminates potential movement and further dampers vibration and noise
• Package includes: Mini-centrifuge, 6 place 1.5/2.0ml tube rotor, 16 place 0.2ml tube rotor (singles or 2 x 8 strip), 6 tube adapters 0.2ml, 6 tube adapters 0.5ml, 4 o-rings, storage case for rotors and adapters, tube rack, low voltage & double insulated power adapter with 4 interchangeable plugs

• Variable speed rotary dial provides pre-set speed control (1000, 2000, 3000 rpm) during vortex mixing
• Stable elastomeric device feet, provide vibration dampening and prevent movement during operation
• Holding slots for no less than seven different sizes of tubes and a standard assay plate
• Innovative head can be removed for cleaning
• High impact ABS body shell
• US Design Patent No. D787,085

• Homogenize up to 24 samples in seconds
• Broad performacne range 1 to 6 m/s
• Sample volumes ranging from 25uL to 2mL
• Maintenance free
• Programmable time, dwells, multiple cycles
• Built-in safety sensors and temperature sensor
• Able to up-scale to 15 or 50ml tube by changing the tube adaptors
• Optimal for cryogenic unit for heat-sensitive sample processing

Compact overhead stirrer, ideal for continuous, general purpose mixing. Easily fits into fume hoods or enclosed workstations.

• Delivers accurate, repeatable results for volumes up to 25L and 15,000cps
• Four-digit speed display shows speed accurate to ± 1rpm
• Last speed setting is stored in memory before unit is powered off
• Brushless, maintenance-free DC motor produces consistent mixing at all speeds and provides automatic overload protection

High power, programmable system ideal for nanotechnology, cell disruption and homogenization applications.

• Processes 0.2 to 1000mL
• Programmable from 1 second to 10 hours
• A variety of accessories are available including probes for individual samples and a Cup Horn for indirect sonication

Designed with state of the art microprocessor controlled ultrasonic cleaning and sweep technology. Fisherbrand™ S-Series Ultrasonic Cleaners offer a comprehensive range of analogue ultrasonic baths covering the requirements for laboratory research, sonochemistry and degassing applications.

• Long lifespan from cavitation resistant stainless steel tanks
• LED display showing set and remaining time and pre-set and actual temperature
• Newly developed cover reduces noise and accelerates the heating up process
• Easy draining of cleaning liquid through the drain duct via a dial on the side

• Provides smooth, e ortless dispensing with adjustable delivery nozzle
• Fully autoclavable and high chemical compatibility
• Design with PTFE piston for smooth movement
• Factory calibrated ISO 8655
• Each bottle top dispenser includes one 28mm, 32mm, 36mm, 40mm, 45mm bottle neck adaptor

FisherbrandTM IsotempTM hotplate stirrers are designed to provide precise stirring control, exceptional safety and temperature performance for your routine protocols.

• HOT TOP warning system designed to protect from accidental burns with prominent display when heating surface is above 50°C (122°F)
• Automatic over-temperature protection
• Optional temperature probe and splash guard protection shield
• Stir bar is included with stirrer and stirring hotplate models

• Standard RS232 connectivity for easy data transfer
• Durably constructed, and features a stainless steel pan to withstand day-to-day use
• Two adjustable fee that allow user to level the balance
• A large, bright backlit display allows for easy viewing of results

Provide intuitive, simple operation and high accuracy measurements in a compact, affordable meter.

• Graphic backlit display with date and time, stability indicator and alarms
• pH slope and o set display
• Automatic or manual temperature compensation, displayed in °C or °F
• Password protection of calibration and setup modes
• RS232 and USB interfaces

FisherbrandTM IsotempTM general purpose deluxe water baths provide powerful technology in a compact design.

• Smaller footprint, compared to previous models
• Advanced temperature controller is designed for extended functionality
• Simple to operate and monitor with icon-based graphical display
• Enhanced hinge design supports open lid configuration and easy lid removal
• Low-fluid protection prevents bath damage and overheating

Fisherbrand™ Reusable Glass Media Bottles with Cap feature a convenient wide opening, enhanced graduations and a polypropylene pour ring. Feature clear (natural), drip-free, replaceable polypropylene pour ring.

Timer/Thermometer

We offer a complete range of test and measurement instruments that are individually serialized, calibrated and certified Traceable to NIST.

• Records minimum and maximum readings
• Obtain accurate results for a variety of environment and
  laboratory monitoring conditions
• Visual and audible alarms event
• Programmable high or low alarm settings

• Digitally track your temperature readings 24/7
• Maintain the most recent 525,600 temperature observations (rolling memory)
• Transfer recorded data in CSV format via USD drive – no software required
• Audible/visual alarm when parameters have been breached
• Meets CDC/VFC requirements

Temperature Datalogger for LRF

Temperature Datalogger for ULT

Temperature Datalogger for LN2 Tank

• Digitally track your temperature readings 24/7
• Can store more than 1 million data points and no data overwriting
• Transfer recorded data in CSV format via USD drive – no software required
• Audible/visual alarm when parameters have been breached
• Comply to 21 CFR 11 requirement

Temperature Datalogger for LRF

Temperature Datalogger for ULT

Temperature Datalogger for LN2 Tank

Temperature Datalogger for Transportation

• Display cumulative Alarm Duration from user selected MIN/MAX values
• Integrates with MaxiThermal Software for complete data analysisReusable/Re-programmable
• Reusable/Re-programmable
• Storage Capacity: 7,680 readings
• IP66 Waterproof Rating
• Pre-programmed with alarm values of 2°C (low) and 8°C (high) and a recording interval to allow for 30 days of recording (readings are logged every 5 minutes, 33 seconds)

Datalogging Hygrometers

Used to read temperature, relative humidity and time. It is great for hoods, storerooms, cleanrooms and other environments that need to be monitored.

• Excursion-Trac: Rolling memory structure, maintains 525,504 observations
• Memory-Loc: Fixed memory structure, maintains 688,086 observations; 21 CFR Part 11 compliance
• Visual/audible Smart-Alarm™ and stores up to 30 unique alarm events
• Hassle-free retrieval if data via USB data transfer
• Status indicators - Low battery, memory full, USB data transfer and active alarm state

Fisherbrand™ Excursion-Trac™

Datalogging Hygrometers (Temp/RH)

Datalogging Barometers

Simultaneously monitor barometric pressure, temperature and humidity

• Excursion-Trac: Rolling memory structure, maintains 525,600 observations
• Memory-Loc: Fixed memory structure, maintains 819,150 observations; 21 CFR Part 11 compliance
• Visual/audible Smart-AlarmTM and stores up to 30 unique alarm events
• Hassle-free retrieval if data via USB data transfer
• Status indicators - Low battery, memory full, USB data transfer and active alarm state
• Altitude Compensation from -100 to 2500 meters

Datalogging Hygrometers

Used to read temperature, relative humidity and time. It is great for hoods, storerooms, cleanrooms and other environments that need to be monitored.

• Excursion-Trac: Rolling memory structure, maintains 525,504 observations
• Memory-Loc: Fixed memory structure, maintains 688,086 observations; 21 CFR Part 11 compliance
• Visual/audible Smart-AlarmTM and stores up to 30 unique alarm events
• Hassle-free retrieval if data via USB data transfer
• Status indicators - Low battery, memory full, USB data transfer and active alarm state

Fisherbrand™ Memory-Loc™

Barometers